 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| THE FULL RANGE OF FERRITE BEADS LARGE ASSORTMENT OF FERRITE CLAMPS EMI SUPPRESSION DEVICES ALLPOWER SOURCE ATTENUATION OF CONDUCTED NOISE FLAT CABLE CLAMPS COMMON MODE BALUNS FERRITE BEADS D-SUBCONNECTOR NOISE SUPPRESSORS ALLPOWER DIVISION TECHNOLOGY DYNAMICS INC. 100 School Street, Bergenfield, NJ 07621 Phone: (201) 385-0500, Fax: (201) 385-0702 www.theallpower.com www.DataSheet.in ALLP WER SOURCE THE IRON POWDER CORES 1. Applications and Characteristics: If the design frequency is below 300KHz, the preferred choice of RF circuits for the iron powder core are: DC power supply chokes, motors, dimmer control filteres and other EMI/RFI circuits. 2. Temperature Effects: The iron powder core is well suited from -55C to +125C. Because the iron powder core does not have a low curie temperature it will function to several hundred degrees Celcius. However, continued operation above 200C may result in a permanent shift in characteristic. EPOXY COATING: 94V-0 COLOR CODE: YELLOW/WHITE 5. Iron Powder Material Properties PROPERTY Initial Permeability Curie Temperature Pratical Frequency Range Specific Gravity Temperature Stability (+) UNIT SYBOL mi 26 75 >300 1-300 o C Tc KHZ d Ppm/oC 6.7 780 THE ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com 26 www.DataSheet.in ALLP WER SOURCE THE MN-ZN TOROID CORES Symbols Definitions Effective path length Effective cross-sectional area Effective core volume Inductance factor Le Ae Ve AL 5. Dimensions and Magnetic Parameters ITEM T4x2x2 T6x3x2 T6x3x3 T9x5x3 T10.3x5.4x5 T12x6x4 T12.7x7.1x4 T12.7x7.1x6.35 T12.7x7.7x6.5 T14x8.4x5 T14x8.4x6 T14x8.4x7 T15.8x9.5x6.8 T16x12x8 T18x10x7 T20x10x8 T20x10x10 T22x14x6.5 T22x14x8 T22x14x12.7 T25x15x8 T25x15x10 T25x15x13 T25x15x15 T28x18x8 T28x18x16 T31x19x13 T31x19x16 T35.6x25.4x15 THE Mechanical Dimension OD (mm) 4.0 + 0.2 6.0 + 0.3 6.0 + 0.3 9.0 + 0.3 10.3 + 0.5 12.0 + 0.5 12.7 + 0.5 12.7 + 0.5 12.7 + 0.5 14.0 + 0.5 14.0 + 0.5 14.0 + 0.5 15.8 + 0.5 ID (mm) 2.0 + 0.2 3.0 + 0.2 3.0 + 0.2 5.0 + 0.3 5.4 + 0.3 6.0 + 0.3 7.1 + 0.3 7.1 + 0.3 7.7 + 0.3 8.4 + 0.3 8.4 + 0.3 8.4 + 0.3 9.5 + 0.5 Magnetic Dimension AL (nH/N2) Le Ae Ve M25 M50 M70 HT (mm) cm2 cm2 cm2 + 25% + 25% + 30% 2.0 + 0.2 0.9430 0.0200 0.1885 666 1333 1866 2.0 + 0.2 3.0 + 0.3 3.0 + 0.3 5.0 + 0.3 4.0 + 0.3 4.0 + 0.3 6.5 + 0.3 5.0 + 0.3 6.0 + 0.3 7.0 + 0.3 6.8 + 0.3 8.0 + 0.3 7.0 + 0.3 8.0 + 0.5 6.5 + 0.5 8.0 + 0.5 8.0 + 0.5 1.4130 0.0300 0.0423 1.4130 0.0450 0.0636 2.1991 0.0600 0.1319 2.4661 0.1225 0.3021 2.8274 0.1200 0.3392 3.1101 0.1120 0.3483 3.2044 0.1625 0.5207 3.5185 0.1400 0.4926 3.5185 0.1680 0.5911 3.5185 0.1960 0.6896 3.9741 0.2142 0.8512 4.3982 0.1600 0.7037 4.3982 0.2800 1.2315 4.7123 0.4000 1.8849 5.6548 0.2600 1.4702 5.6548 0.3200 1.8095 6.2831 0.4000 2.5132 666 1000 857 1560 1333 1131 1796 1593 1250 1500 1750 1693 1142 2000 2667 3333 1444 1777 2822 2000 2500 3250 3750 1730 3478 3120 3840 2123 2508 1333 2000 1714 3121 2666 2262 3592 3186 2500 3000 3500 3387 2285 4000 5333 6666 2888 3555 5644 4000 5000 6500 7500 3478 6857 6240 7680 4247 5016 1866 2800 2400 4369 3733 3167 5029 4461 3486 4200 4900 4741 3200 5600 7466 9333 4044 4977 7902 5600 7000 9100 10500 4869 9739 8736 10752 5946 7022 6.35 + 0.3 3.1101 0.1778 0.5530 16.0 + 0.5 12.0 + 0.5 18.0 + 0.5 10.0 + 0.5 20.0 + 0.5 10.0 + 0.5 22.0 + 0.5 14.0 + 0.5 22.0 + 0.5 14.0 + 0.5 25.0 + 0.5 15.0 + 0.5 20.0 + 0.5 10.0 + 0.5 10.0 + 0.5 4.7123 0.5000 2.3561 22.0 + 0.5 14.0 + 0.5 12.7 + 0.5 5.6548 0.5080 2.8726 25.0 + 0.5 15.0 + 0.5 10.0 + 0.5 6.2831 0.5000 3.1415 25.0 + 0.5 15.0 + 0.5 13.0 + 0.5 6.2831 0.6500 4.0840 25.0 + 0.5 15.0 + 0.5 15.0 + 0.5 6.2831 0.7500 4.7123 28.0 + 0.8 18.0 + 0.8 8.0 + 0.8 7.2256 0.4000 2.8902 28.0 + 0.8 18.0 + 0.8 16.0 + 0.8 7.2256 0.8000 5.7805 31.0 + 0.8 19.0 + 0.8 13.0 + 0.8 7.8540 0.7800 6.1261 31.0 + 0.8 19.0 + 0.8 16.0 + 0.8 7.8540 0.9600 7.5398 35.6 + 0.8 15.0 + 0.8 15.0 + 0.3 9.5818 0.7650 7.3301 T35.6x25.4x12.7 35.6 + 0.8 12.7 + 0.8 12.7 + 0.8 9.5818 0.6477 6.2061 ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 25 www.DataSheet.in 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com ALLP WER SOURCE THE ANTENNA FERRITE BAR / AP AR TYPE 1. Material: A2G 2. Ordering Code: A5N B-7 B-18 3. Shape: 4. Dimensions: (m/m) CORES AP-2x8x40 AP-2.5x8x40 AP-2.8x8x46 AP-3x7.5x45 AP-3x8x35 AP-4x8x45 AP-4x10x50 AP-4x12x60 AP-5x8x50 AP-5x13x80 AP-6x10x42 AP-6x12x53 THE A 2.0 + 0.15 2.5 + 0.2 2.8 + 0.2 3.0 + 0.3 3.0 + 0.3 4.0 + 0.3 4.0 + 0.3 4.0 + 0.3 5.0 + 0.3 5.0 + 0.3 6.0 + 0.3 6.0 + 0.3 B 7.8 + 0.3 8.0 + 0.3 8.0 + 0.3 8.0 + 0.3 7.5 + 0.3 8.0 + 0.3 8.0 + 0.3 L 49.0 + 1.0 40.0 + 1.0 40.0 + 1.0 46.0 + 1.0 45.0 + 1.0 35.0 + 1.0 45.0 + 1.0 CORES AR-8x50 AR-8x60 AR-8x80 AR-8x100 AR-8x140 AR-9.5x57 AR-10x21 AR-10x30 AR-10x50 AR-10x60 AR-10x100 AR-10x120 AR-10x200 A 8.0 + 0.3 8.0 + 0.3 8.0 + 0.3 8.0 + 0.3 8.0 + 0.3 9.5 + 0.3 10.0 + 0.3 10.0 + 0.3 10.0 + 0.3 10.0 + 0.3 10.0 + 0.3 10.0 + 0.3 10.0 + 0.3 B 7.0 + 0.3 7.0 + 0.3 7.0 + 0.3 7.0 + 0.3 7.0 + 0.3 8.5 + 0.3 9.0 + 0.3 9.0 + 0.3 9.0 + 0.3 9.0 + 0.3 9.0 + 0.3 9.0 + 0.3 9.0 + 0.3 L 50.0 + 1.0 60.0 + 1.0 80.0 + 1.0 100.0 + 1.0 140.0 + 1.0 57.0 + 1.0 21.0 + 1.0 30.0 + 1.0 50.0 + 1.0 60.0 + 1.0 100.0 + 1.2 120.0 + 1.0 200.0 + 1.0 AP-1.9x7.8x49 1.9 + 0.15 10.0 + 0.3 50.0 + 1.0 12.0 + 0.3 60.0 + 1.0 8.0 + 0.3 50.0 + 1.0 13.0 + 0.3 80.0 + 1.2 10.0 + 0.3 42.0 + 1.0 12.0 + 0.3 53.0 + 1.0 ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 23 www.DataSheet.in 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com ALLP WER SOURCE THE MULTI-APERTURE CORES / RID TYPE 1. Material: A-5 2. Ordering Code: B-15 B-18 3. Shape: 4. Dimensions: (m/m) CORES RID 1.9x1.45x3.35 RID 2.6x4x5.3 RID 3x2x5 RID 3x5x5 RID 3.5x5x6.3 RID 4x3.2x7 RID 4x6x7 RID 6.5x4x12 RID 6.8x4x11.8 RID 7.5x4x13.5 RID 7.5x14x13.5 RID 8x7x15 RID 8x14x15 THE A 1.9 + 0.2 2.6 + 0.2 3.0 + 0.2 3.0 + 0.2 3.5 + 0.2 4.0 + 0.2 4.0 + 0.2 6.5 + 0.3 6.8 + 0.3 7.5 + 0.3 7.5 + 0.3 8.0 + 0.3 8.0 + 0.3 B 1.45 + 0.15 4.0 + 0.2 2.0 + 0.2 5.0 + 0.3 5.0 + 0.3 3.2 + 0.2 6.0 + 0.3 4.0 + 0.2 4.0 + 0.2 4.0 + 0.2 14.0 + 052 7.0 + 0.3 1.40 + 0.5 C 3.35 + 0.2 5.3 + 0.2 5.0 + 0.2 5.0 + 0.2 6.3 + 0.3 7.0 + 0.3 7.0 + 0.3 12.0 + 0.4 11.8 + 0.4 13.5 + 0.5 13.5 + 0.5 15.0 + 0.5 15.0 + 0.5 OD 0.76 + 0.15 1.0 + 0.15 1.2 + 0.15 1.2 + 0.15 1.8 + 0.15 2.0 + 0.15 2.0 + 0.15 3.8 + 0.25 3.8 + 0.25 3.8 + 0.25 3.8 + 0.25 5.0 + 0.25 5.0 + 0.25 ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com 22 www.DataSheet.in ALLP WER SOURCE THE MULTI-APERTURE WOUND BEADS / R6H TYPE 1. Material: A3 2. Ordering Code: B-15 3. Core Shape: 4. Dimensions: (m/m) A B C D 6.0 + 0.2 10.0 + 0.4 3.4 + 0.15 0.85 + 0.1 5. Impedance (W) Impedance is measured on AC & B-15 material with the HP-4193A test meter. Fig. 1 2 3 4 5 THE TURNS 11/2 2X11/2 2 21/2 3 A3 10MHz 130 130 200 250 320 50MHz 320 320 520 750 900 100MHz 450 450 580 700 700 10MHz 180 180 260 360 450 B-15 50MHz 350 350 500 700 800 100MHz 380 380 480 580 580 ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 21 www.DataSheet.in 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com ALLP WER SOURCE THE CONNECTOR EMI CORES / FD FDH TYPE 1. Material: B-8 2. Ordering Code: 3. Core Shape: 4. Dimensions: (m/m) CORES A B C D E F +0.15 -0 +0.15 1.57 -0 +0.15 1.57 -0 +0.15 1.57 -0 +0.15 1.0 -0 +0.15 1.0 -0 +0.15 1.0 -0 1.57 MIN. IMPEDANCE (OHM) 25MHz 100MHz 20 20 20 20 18 18 18 50 50 50 50 45 45 45 FH-15.4x4.35x8.4 FH-20x5.1x9.9 FH-29.2x7.7x14.4 FH-33.3x8.25x16.4 14.5 + 0.5 22.65 + 0.5 36.4 + 0.5 53.08 + 0.5 13.6 + 0.5 22.6 + 0.4 36.6 + 0.3 7.6 + 0.5 7.6 + 0.5 7.6 + 0.5 7.7 + 0.5 9.5 + 0.3 9.5 + 0.3 9.5 + 0.3 2.8 + 0.1 2.8 + 0.1 2.8 + 0.1 2.8 + 0.1 2.2 + 0.1 2.2 + 0.1 2.2 + 0.1 2.74 + 0.08 2.77 + 0.08 2.77 + 0.08 2.77 + 0.08 2.27 + 0.08 2.29 + 0.15 2.29 + 0.15 2.84 + 0.08 2.84 + 0.08 2.84 + 0.08 2.84 + 0.08 2.54 + 0.15 2.54 + 0.15 2.54 + 0.15 FH-24x12x14 FH-28.5x7.5x15 FH-30x9.4x18.7 THE ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com 20 www.DataSheet.in ALLP WER SOURCE THE ROUND CABLE EMI CORES / FH TYPE (WITH PLASTIC CLIP) 5. Typical Performance Data: * B8FH- 15.4 x 4.35 x 8.4 * B8FH- 28.5 x 7.5 x 15 TEST WIRE: 2 UEW 0.8 X 220mm 1/2 Ts TEST METER: HP4191A TEST WIRE: 2 UEW 0.8 X 220mm 1/2 Ts TEST METER: HP4191A * B8FH- 20 x 5.1 x 9.9 * B8FH- 30 x 9.4 x 18.7 TEST WIRE: 2 UEW 0.8 X 220mm 1/2 Ts TEST METER: HP4191A TEST WIRE: 2 UEW 0.8 X 220mm 1/2 Ts TEST METER: HP4191A * B8FH- 24 x 12 x 14 * B8FH- 29.7 x 13 x 25.9 TEST WIRE: 2 UEW 0.8 X 220mm 1/2 Ts TEST METER: HP4191A TEST WIRE: 2 UEW 0.8 X 220mm 1/2 Ts TEST METER: HP4191A THE 19 www.DataSheet.in ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com ALLP WER SOURCE THE ROUND CABLE EMI CORES / FH TYPE (WITH PLASTIC CLIP) 1. Material: B-8 2. Ordering Code: 3. Core Shape: 4. Dimensions: (m/m) CORES FH-15.4x4.35x8.4 FH-20x5.1x9.9 FH-29.2x7.7x14.4 FH-33.3x8.25x16.4 FH-24x12x14 FH-28.5x7.5x15 FH-30x9.4x18.7 FH-29.7x13x25.9 THE A 15.4 + 0.5 20.0 + 0.5 29.2 + 0.5 33.3 + 0.6 24.0 + 0.6 28.5 + 0.75 30.0 + 0.75 B 4.35 + 0.3 5.1 + 0.3 7.6 ~ 7.8 8.2 ~ 8.4 7.5 + 0.3 9.4 + 0.3 C 8.4 + 0.4 9.9 + 0.4 14.4 + 0.5 D 1.9 + 0.15 2.65 + 0.15 3.8 + 0.15 5.7 + 0.3 3.3 + 0.15 5.1 + 0.15 6.5 + 0.15 MIN. IMPEDANCE (OHM) Fig. 25MHz 100MHz 1 1 1 1 3 2 2 2 50 70 100 105 50 130 105 120 80 140 180 190 100 200 180 200 16.4 + 0.5 4.65 + 0.15 15.0 + 0.5 18.7 + 0.7 12.0 + 0.4 14.0 + 0.5 29.7 + 0.75 13.0 + 0.3 25.9 + 0.7 ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com 18 www.DataSheet.in ALLP WER SOURCE THE FLAT CABLE EMI CORES / FP FI TYPE 4. Typical Performance Date: (Cont.) * FP- 49.6 x125 x 6.5 * FI- 63.5 x 28.5 x 6.35 TEST WIRE: 2 UEW 0.8 X 220mm 1/2 Ts TEST METER: HP4191A TEST WIRE: 2 UEW 0.8 X 220mm 1/2 Ts TEST METER: HP4191A 5. Dimensions: (m/m) CORES FP-16x12x4.5 FP-23.5x15x6.3 FP-25x12x5 FP-32x9.5x6.5 FP-33x11.5x7.5 FP-33x15x8.45 FP-33.5x12x6.5 FP-x12x6.540 FP-45.2x12x6.5 FP-46.5x10x6.5 FP-49.6x12x6.5 FP-57.6x12x6.5 FPL-28x14.6x7.7 FI-45.1x28.5x4.5 A B C 4.5 + 0.3 6.3 + 0.4 5.0 + 0.3 6.5 + 0.4 7.5 + 0.4 6.5 + 0.4 6.5 + 0.4 6.5 + 0.4 6.5 + 0.4 6.5 + 0.4 6.5 + 0.4 7.7 + 0.4 4.5 + 0.5 D E MIN. IMPEDANCE (OHM) Fig. 25MHz 100MHz 1 1 1 1 1 1 1 1 1 1 1 1 2 3 3 3 3 20 20 20 15 25 25 20 15 15 25 15 15 30 45 50 40 65 50 50 50 45 60 60 40 35 35 60 35 40 75 80 90 80 150 16.0 + 0.5 12.0 + 0.4 23.5 + 0.8 15.0 + 0.5 25.0 + 0.8 12.0 + 0.4 32.0 + 0.8 9.5 + 0.3 33.0 + 0.8 11.5 + 0.3 33.5 + 1.0 12.0 + 0.3 40.0 + 1.0 12.0 + 0.3 45.2 + 1.0 12.0 + 0.3 46.5 + 1.0 10.0 + 0.3 49.6 + 1.0 12.0 + 0.3 57.6 + 1.0 12.0 + 0.3 28 + 1.0 14.6 + 0.5 45.1 + 1.0 28.5 + 0.8 11.5 + 0.3 0.85 + 0.15 19.0 + 0.5 28.0 + 0.8 28.0 + 0.8 27.0 + 0.7 34.8 + 0.8 40.0 + 0.8 40.0 + 0.8 44.0 + 0.8 52.0 + 0.8 23.0 + 0.5 34.4 + 0.8 1.0 + 0.2 2.8 + 0.42 2.8 + 0.2 3.5 + 0.3 1.5 + 0.2 1.3+ 0.2 1.3 + 0.2 1.3 + 0.2 1.3 + 0.2 1.5 + 0.2 1.5 + 0.3 0.6 + 0.2 0.8 + 0.2 0.8 + 0.2 0.8 + 0.2 21.0 + 0.5 0.85 + 0.15 33.0 + 0.8 15.0 + 0.5 8.45 + 0.4 28.0 + 0.8 FI-45.1x28.5x6.35 45.1 + 1.0 28.5 + 0.8 6.35 + 0.5 34.4 + 0.8 FI-63.5x28.5x6.35 36.5 + 1.5 28.5 + 0.8 6.35 + 0.5 52.1 + 1.5 FI-76.2x28.5x6.4 THE 76.2 + 1.5 28.5 + 0.8 6.40 + 0.5 65.3 + 1.5 ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 17 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com www.DataSheet.in ALLP WER SOURCE THE FLAT CABLE EMI CORES / FP FI TYPE 1. Material: B-8 2. Ordering Code: B-15 3. Core Shape: 4. Typical Performance Date: * FP- 33 x 11.5 x 7.5 * FP- 45.2 x 12 x 6.5 TEST WIRE: 2 UEW .65 X 160mm 1/2 Ts TEST METER: HP4191A THE TEST WIRE: 2 UEW 0.8 X 220mm 1/2 Ts TEST METER: HP4191A DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com ALLPOWER SOURCE 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com 16 www.DataSheet.in ALLP WER SOURCE THE EMI TOROID CORES / T TYPE * B15T- 20.5 x 10 x 10.3 * B15T- 18.3 x 10 x 10 TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A * B8T- 22.5 x 6.4 x 13.8 * B8T- 25 x 12 x 15 TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A * B8T- 28 x 7.5 x 16 * B8T- 31 x 8 x 19 TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A THE ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 15 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com www.DataSheet.in ALLP WER SOURCE THE EMI TOROID CORES / T TYPE 5. Typical Performance Data: * B15T- 8 x 4 x 4 * B15T- 9.5 x 4.5 x 4.75 TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A * B15T- 12 x 5.5 x 7 * B15T- 12.7 x 6.35 x 7.93 TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A * B15T- 16.2 x 7.5 x 9.1 * B15T- 17.5 x 12.7 x 9.5 TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A THE ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com 14 www.DataSheet.in ALLP WER SOURCE THE EMI TOROID CORES / T TYPE A 12.1 + 0.4 13.0 + 0.4 13.5 + 0.4 13.5 + 0.4 14.2 + 0.4 16.0 + 0.4 16.0 + 0.4 16.0 + 0.4 16.2 + 0.4 16.2 + 0.4 17.5 + 0.5 17.5 + 0.5 17.5 + 0.5 17.5 + 0.5 17.5 + 0.5 17.5 + 0.5 18.3 + 0.5 18.3 + 0.5 18.4 + 0.5 18.4 + 0.5 20.5 + 0.5 20.5 + 0.5 20.5 + 0.5 22.5 + 0.5 22.5 + 0.5 23.0 + 0.5 25.0 + 0.6 26.0 + 0.6 28.0 + 0.7 28.0 + 0.7 29.0 + 0.7 31.0 + 0.8 31.0 + 0.8 47.0 + 1.0 B 11.0 + 0.3 8.0 + 0.3 4.0 + 0.25 5.0 + 0.3 7.0 + 0.3 8.0 + 0.3 8.0 + 0.3 4.8 + 0.3 7.5 + 0.3 5.0 + 0.3 6.4 + 0.3 8.0 + 0.3 12.7 + 0.4 13.5 + 0.4 15.0 + 0.4 7.0 + 0.3 6.2 + 0.3 12.5 + 0.4 5.0 + 0.3 8.0 + 0.3 6.4 + 0.3 8.5 + 0.3 9.5 + 0.3 8.0 + 0.3 7.5 + 0.3 7.0 + 0.3 8.0 + 0.3 C 8.6 + 0.3 8.2 + 0.3 7.0 + 0.3 7.0 + 0.3 7.0 + 0.3 9.8 + 0.3 12.0 + 0.4 9.1 + 0.3 9.1 + 0.3 9.5 + 0.3 9.5 + 0.3 9.5 + 0.3 9.5 + 0.3 9.5 + 0.3 9.5 + 0.3 10.0 + 0.3 11.0 + 0.3 9.5 + 0.3 10.0 + 0.3 10.3 + 0.3 13.8 + 0.4 13.8 + 0.4 12.5 + 0.4 16.0 + 0.4 16.0 + 0.4 19.0 + 0.5 19.0 + 0.5 MIN. IMPEDANCE (OHM) 25MHz 100MHz 30 63 25 28 22 25 25 25 22 33 22 30 23 28 30 40 45 55 30 40 25 50 25 40 40 20 30 40 40 40 26 85 30 40 25 28 46 60 60 58 60 55 55 50 65 58 65 58 63 60 80 86 92 65 75 60 88 60 75 80 55 65 85 75 80 60 135 65 80 63 65 90 CORES B15 T12.1x11x8.6 B15 T13x8x8.2 B15 T13.5x4x7 B15 T13.5x5x7 B8 T14.2x7x7 B8 T16x8x9.8 B8 T16x8x12 B15 T16x10x10 B15 T16.2x4.8x9.1 B15 T16.2x7.5x9.1 B15 T17.5x5x9.5 B15 T17.5x6.4x9.5 B30 T17.5x8x9.5 B8 T17.5x12.7x9.5 B15 T17.5x13.5x9.5 B15 T17.5x15x9.5 B15 T18.3x7x10 B15 T18.3x10x10 B15 T18.4x6.2x11 B15 T18.4x12.5x9.5 B15 T20.5x5x10.3 B15 T20.5x8x10.3 B15 T20.5x10x10.3 B8 T22.5x6.4x13.8 B15 T22.5x8.5x13.8 B15 T23x9.5x12.5 B8 T25x12x15 B30 T26x8x16 B15 T28x20x13.8 B15 T28x7.5x16 B15 T29x14x19 B15 T31x7x19 B15 T31x8x19 B15 T47x14x29.5 THE B15 T12.7x6.35x7.93 12.7 + 0.4 6.35 + 0.3 7.93 + 0.3 10.0 + 0.3 10.0 + 0.3 10.0 + 0.3 10.0 + 0.3 10.0 + 0.3 10.3 + 0.3 B15 T22.5x13.5x13.8 22.5 + 0.5 13.5 + 0.4 13.8 + 0.4 12.0 + 0.4 15.0 + 0.4 20.0 + 0.5 13.8 + 0.4 14.0 + 0.4 19.0 + 0.5 14.0 + 0.5 29.5 + 0.6 ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 13 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com www.DataSheet.in ALLP WER SOURCE THE EMI TOROID CORES / T TYPE 1. Material: B-8 B-10 B-12 B-15 B-30 2. Ordering Code: 3. Core Shape: 4. Dimensions: (m/m) CORES B15 T4x1.5x2 B15 T6x2x3 B15 T8x4x4 B15 T9.3x3.2x6.3 B15 T9.5x4.5x4.75 B30 T9.66x3.3x5 B15 T10x5x5.1 B15 T10x4x6 B15 T10x5x7 B15 T11x9x5 B15 T11.8x8x7.3 B15 T12x4x6 B15 T12x6x6 B8 T12x5.5x7 B15 T12.1x8x8.6 THE A 4.0 + 0.25 6.0 + 0.3 8.0 + 0.3 9.3 + 0.3 9.5 + 0.3 9.66 + 0.3 10.0 + 0.3 10.0 + 0.3 10.0 + 0.3 11.0 + 0.4 11.8 + 0.4 12.0 + 0.4 12.0 + 0.4 12.0 + 0.4 12.1 + 0.4 B 1.5 + 0.2 2.0 + 0.2 4.0 + 0.25 3.2 + 0.25 4.5 + 0.3 3.3 + 0.25 5.8 + 0.3 5.0 + 0.3 4.0 + 0.25 5.0 + 0.3 9.0 + 0.3 8.0 + 0.3 4.0 + 0.25 6.0 + 0.3 5.5 + 0.3 8.0 + 0.3 C 2.0 + 0.2 3.0 + 0.25 4.0 + 0.25 6.3 + 0.3 4.75 + 0.3 5.0 + 0.3 6.35 + 0.3 5.1 + 0.3 6.0 + 0.3 7.0 + 0.3 5.0 + 0.3 7.3 + 0.3 6.0 + 0.3 6.0 + 0.3 7.0 + 0.3 8.6 + 0.3 MIN. IMPEDANCE (OHM) 25MHz 12 15 20 20 18 20 17 20 25 20 18 40 30 22 28 22 22 100MHz 30 40 55 55 50 55 50 50 60 55 55 75 60 58 60 60 58 B15 T7.75x4.25x3.8 7.75 + 0.3 4.25 + 0.25 3.8 + 0.25 B15 T9.66x5.8x6.35 9.66 + 0.3 ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com 12 www.DataSheet.in ALLP WER SOURCE THE EMI BEAD CORES / TH TYPE * B15RH- 16 x 28 x 9 * B8RH- 14.3 x 28.5 x 6.35 TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A * B8RH- 14.3 x 28.5 x 7 * B8RH- 17.5 x 28.5 x 9.5 TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A * B15RH- 16 x 17 x 9 * B8RH- 28.3 x 28.5 x 13.8 TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A THE ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 11 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com www.DataSheet.in ALLP WER SOURCE THE EMI BEAD CORES / TH TYPE 5. Typical Performance Data * B15RH- 3.5 x 4.7 x 0.8 * B8RH- 12 x 15 x 7.3 TEST WIRE: 2 UEW 0.4 X 63mm 1/2 Ts TEST METER: HP4191A TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A * B15RH- 6 x 10 x 3 * B15RH- 12 x 20 x 5.6 TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A * B15RH- 9.5 x 10 x 5 * B15RH- 14.2 x 23.5 x 7.9 THE ALLPOWER SOURCE TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A TEST WIRE: 2 UEW 1.0 X 63mm 1/2 Ts TEST METER: HP4191A DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com 10 www.DataSheet.in ALLP WER SOURCE THE EMI BEAD CORES / TH TYPE A 8.0 + 0.3 9.0 + 0.3 9.5 + 0.3 9.5 + 0.3 9.8 + 0.3 B 9.2 + 0.3 16.0 + 0.5 10.0 + 0.4 12.7 + 0.4 C 5.0 + 0.3 5.0 + 0.3 5.0 + 0.3 5.0 + 0.3 MIN. IMPEDANCE (OHM) 25MHz 100MHz 30 60 60 42 45 30 40 28 40 80 60 40 100 130 45 50 88 70 130 130 130 70 60 90 88 100 100 90 65 120 110 100 100 116 100 80 88 63 75 60 75 125 100 85 160 180 80 85 140 120 190 180 180 110 100 160 140 150 150 135 100 180 160 150 145 200 CORES B15 RH8x9.2x5 B15 RH9x16x5 B15 RH9.5x10x5 B8 RH9.5x12.7x5 B15 RH9.8x13.5x6.35 B15 RH10x10x7 B15 RH10.3x10.2x5.8 B15 RH10.5x20x5.5 B15 RH11.5x19x7.1 B8 RH12x15x7.3 B15 RH12x20x5.6 B15 RH12x25.7x5.5 B15 RH12.7x12.7x7.9 B15 RH12.7x15x7.9 B15 RH14.2x23.5x7.9 B15 RH14.3x15x6.35 B8 RH14.3x28.5x7 B8 RH15.5x28.5x7.3 B15 RH16x16x7.9 B8 RH16x17x9 B8 RH16x28x9 B15 RH16x28x9.8 B8 RH17.5x28.5x9.5 B15 RH17.5x28.5x9.9 B15 RH17.5x28.5x11 B15 RH18.4x28.5x9.5 B15 RH18.4x28.5x10.2 B15 RH18.4x28.5x11 B8 RH28.3x28.5x13.8 THE B15 RH9.66x10.2x6.35 9.66 + 0.3 10.2 + 0.4 6.35 + 0.3 13.5 + 0.4 6.35 + 0.3 7.0 + 0.3 5.8 + 0.3 5.5 + 0.3 7.1 + 0.3 5.6 + 0.3 5.5 + 0.3 7.9 + 0.3 7.9 + 0.3 7.9 + 0.3 10.0 + 0.4 10.0 + 0.4 10.3 + 0.4 10.2 + 0.4 10.5 + 0.4 20.0 + 0.5 11.5 + 0.4 19.0 + 0.5 12.0 + 0.4 20.0 + 0.6 12.0 + 0.4 25.7 + 0.7 12.7 + 0.4 12.7 + 0.4 12.7 + 0.4 15.0 + 0.5 14.2 + 0.5 13.5 + 0.7 12.0 + 0.4 15.0 + 0.5 7.3 + 0.15 14.3 + 0.5 15.0 + 0.5 6.35 + 0.3 14.3 + 0.5 28.5 + 0.7 15.5 + 0.5 28.5 + 0.7 16.0 + 0.5 16.0 + 0.5 16.0 + 0.5 17.0 + 0.5 16.0 + 0.5 28.0 + 0.7 16.0 + 0.5 28.0 + 0.7 17.5 + 0.5 28.5 + 0.7 17.5 + 0.5 28.5 + 0.7 7.0 + 0.3 7.3 + 0.3 7.9 + 0.3 9.0 + 0.4 9.0 + 0.4 9.8 + 0.4 9.5 + 0.4 9.9 + 0.4 B15 RH14.3x28.5x6.35 14.3 + 0.5 28.5 + 0.7 6.35 + 0.3 17.5 + 0.5 28.5 + 0.7 11.0 + 0.5 18.4 + 0.5 28.5 + 0.7 8.4 + 0.5 9.5 + 0.4 B15 RH17.5x28.5x12.8 17.5 + 0.5 28.5 + 0.7 12.8 + 0.5 28.5 + 0.7 10.2 + 0.4 18.4 + 0.5 28.5 + 0.7 11.0 + 0.5 28.3 + 0.7 28.5 + 0.7 13.8 + 0.6 B15 RH19.7x28.5x11.5 19.7 + 0.5 28.5 + 0.7 13.8 + 0.6 9 ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com www.DataSheet.in ALLP WER SOURCE THE EMI BEAD CORES / RH TYPE 1. Material: B-8 B-10 B-12 B-15 B-30 2. Ordering Code: 3. Core Shape: 4. Dimensions: (m/m) CORES B15 RH3.5x3.5x0.8 B15 RH3.5x4.7x0.8 B15 RH3.5x4x1.2 B15 RH3.5x6x1.2 B8 RH3.5x3x1.35 B8 RH3.5x5x1.5 B15 RH4x10x2 B15 RH4.5x5x1.5 B15 RH5x5x2.6 B15 RH5x15x1.5 B15 RH8x8x3.75 B15 RH6x10x3 B15 RH7.75x7.75x4 B15 RH7.75x13x4 THE A B C MIN. IMPEDANCE (OHM) 25MHz 25 30 25 30 15 18 30 30 26 80 30 48 56 35 56 100MHz 45 50 50 55 35 35 55 60 55 140 70 80 92 65 90 3.5 + 0.2 3.5 + 0.2 0.8 + 0.15 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 3.5 + 0.2 B15 RH7.75x7.75x2.5 3.5 + 0.2 3.5 + 0.2 ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com 8 www.DataSheet.in ALLP WER SOURCE THE EMI MULTILAYER FERRITE CHIP BEADS / CB TYPE -25 to +85C [-40 to +185F] -40 to+85C [-40 to +185F] 0 to 60C [32 to 140F] (In tape and reel packing) The chip shall not crack. More than 75% of the terminal electrode shall be covered with solder. Preheat: 120 to 150C [248 to 302F] for 60 seconds Solder: H63A (eutectic solder) Solder Temperature: 300 5C [572 9F] Flux: Rosin Dip time: 10 0.5 seconds Preheat: 120 to 150C [248 to 302F] for 60 seconds Solder: H63A (eutectic solder) Solder Temperature: 230 5C [572 9F] Flux: Rosin Dip Time: 3 1 seconds RELIABILITY AND TEST CONDITIONS Operating Temperature Range Storage Temperature Range Soldering Heat Resistance Solderability More than 90% of the terminal electrode shall be covered with new solder Terminal Strength The terminal electrode shall not break off nor will the ferrite be damaged. Bending Strength The ferrite shall not be damaged by forces applied on the right. Flexure Strength No mechanical damage shall be noticed even when the board is bent 2mm [0.079 inches]. Thermal Shock (Temperature Cycle) High Temperature Resistance Humidity Resistance Drop Vibration Impedance shall be within 20% of the initial value. Temperature: -25C [-13F], +85C +[185F] for 30 minutes each, 50 cycles. Applied 200mA DC and placed at 80C [176F] for 500 hours, then measured at room ambient temperature. Applied 200mA DC and placed at 90%RH, 60C [140F] for 500 hours, then measured at room ambient temperature. Drop 10 times on a concrete floor from a height of 1m [39.370 inches] Frequency: 10 to 55Hz Amplitude: 1.52mm [0.060 inches] Direction and time: X, Y and Z direction for 2 hours each. Solvent: Trichloroethylene Washer: Ultrasonic washer (100W) Washing time: 3 minutes Solvent Resistance THE ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 7 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com www.DataSheet.in ALLP WER SOURCE THE EMI MULTILAYER FERRITE CHIP BEADS / CB TYPE Packing Available in Bulk, or Tape and Reels Tape Dimensions Type A B W T H Chips/Reel CB160808 CB201209 CB321611 CB321616 CB322513 CB451616 CB453215 CB575018 CB575032 1.5 2.3 8.0 4.0 1.3 4000 1.5 2.3 8.0 4.0 1.3 4000 1.9 3.5 8.0 4.0 1.5 2000 1.9 3.5 8.0 4.0 2.0 2000 2.9 3.6 8.0 4.0 1.7 2000 1.9 4.9 12.0 4.0 2.0 2000 3.6 4.9 12.0 8.0 1.9 1000 5.6 6.4 14.0 8.0 2.55 500 5.6 6.4 14.0 8.0 3.95 500 Tape Material Carrier Tape: Polystyrene Cover Tape: Polystyrene Reel Dimensions Type 160808 201209 321611 321616 322513 451616 453215 575018 575032 A 178 + 2 60 + 1 13.0 + 0.5 21.0 + 0.8 2.0 + 0.5 10.0 + 1.0 2.0 + 0.5 1.0 DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 178 + 2 60 + 1 13.0 + 0.5 21.0 + 0.8 2.0 + 0.5 10.0 + 1.0 2.0 + 0.5 1.0 178 + 2 60 + 1 13.0 + 0.5 21.0 + 0.8 2.0 + 0.5 10.0 + 1.0 2.0 + 0.5 1.0 E OC OB B C D E W T OD R OA W T R THE ALLPOWER SOURCE 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com 6 www.DataSheet.in ALLP WER SOURCE THE EMI MULTILAYER FERRITE CHIP BEADS / CB TYPE * Typical | Z |, R, XL Frequency Characteristics CB 201209T-151Y-C2 CB 201209T-601Y-C2 CB 321611T-320Y-C3 CB 321611T-601Y-C2 CB 322513T-900Y-C3 CB 453215T-121Y-C3 THE ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 5 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com www.DataSheet.in ALLP WER SOURCE THE EMI MULTILAYER FERRITE CHIP BEADS / CB TYPE 4. Electrical characteristics: Impedance (W) DC Resistance Rated Current (W) Max (mA) Max At 100 MHz 0.30 400 CB160808T-400Y-C3 40 + 25% 0.50 300 CB160808T-800Y-C3 80 + 25% Part No. CB160808T-121Y-C3 CB160808T-301Y-C3 CB201209T-110Y-C3 CB201209T-320Y-C3 CB201209T-121Y-C3 CB201209T-181Y-C3 CB201209T-301Y-C3 CB201209T-601Y-C3 CB201209T-102Y-C3 CB321611T-320Y-C3 CB321611T-900Y-C3 CB321611T-151Y-C3 CB321611T-301Y-C3 CB321611T-601Y-C3 CB321611T-102Y-C3 120 + 25% 300 + 25% 11 + 25% 32 + 25% 120 + 25% 180 + 25% 300 + 25% 600 + 25% 1000 + 25% 32 + 25% 90 + 25% 150 + 25% 300 + 25% 600 + 25% 1000 + 25% 60 + 25% 32 + 25% 60 + 25% 90 + 25% 60 + 25% 150 + 25% 70 + 25% 120 + 25% 100 + 25% 300 + 25% 400 + 25% .070 1.20 0.10 0.30 0.50 0.70 0.80 0.90 1.00 0.15 0.30 0.40 0.50 0.50 1.00 0.50 0.30 0.30 0.30 0.30 0.50 0.40 0.40 0.04 0.04 0.04 200 150 600 500 300 200 200 200 100 500 400 200 200 200 100 200 400 400 400 400 200 300 300 3000 3000 3000 1. Shape: 2. Ordering Code: CB321616T-600Y-C3 CB322513T-320Y-C3 CB322513T-600Y-C3 CB322513T-900Y-C3 CB451616T-600Y-C3 CB451616T-151Y-C3 CB453215T-700Y-C3 CB453215T-121Y-C3 CB575018T-101Y-C3 CB575032T-301Y-C3 3. Dimensions in mm (inches): CB575032T-401Y-C3 Part No. A B 0.9 + 0.20 (0.035 + 0.008) C 0.9 + 0.20 (0.035 + 0.008) 0.9 + 0.20 (0.035 + 0.008) 1.1 + 0.20 (0.043 + 0.008) 1.6 + 0.20 (0.063 + 0.008) 1.3 + 0.20 (0.051 + 0.008) D 0.3 + 0.20 (0.012 + 0.008) 0.5 + 0.30 (0.020 + 0.012) 0.5 + 0.30 (0.020 + 0.012) 0.5 + 0.30 (0.020 + 0.012) 0.5 + 0.30 (0.020 + 0.012) CB 160808 1.6 + 0.20 (0.063 + 0.008) CB 321611 3.2 + 0.20 (0.126 + 0.008) CB 321616 3.2 + 0.20 (0.126 + 0.008) CB 201209 2.0 + 0.20 (0.079 + 0.008) 1.25 + 0.20 (0.047 + 0.008) 1.6 + 0.20 (0.063 + 0.008) 1.6 + 0.20 (0.063 + 0.008) CB 322513 3.2 + 0.20 (0.126 + 0.008) 2.50 + 0.20 (0.098 + 0.008) CB 453215 4.5 + 0.25 (0.177 + 0.008) 3.20 + 0.20 (0.126 + 0.008) CB 451616 4.5 + 0.25 (0.177 + 0.008) 1.60 + 0.20 (0.063 + 0.008) 1.60 + 0.20 (0.063 + 0.008) 0.5 + 0.30 (0.020 + 0.012) 1.5 + 0.20 (0.059 + 0.008) 0.5 + 0.30 (0.020 + 0.012) CB 575018 5.7 + 0.40 (0.225 + 0.016) 5.00 + 0.30 (0.197 + 0.012) 1.80 + 0.30 (0.071 + 0.012) 0.5 + 0.30 (0.020 + 0.012) CB 575032 5.7 + 0.40 (0.225 + 0.016) 5.00 + 0.30 (0.197 + 0.012) 3.20 + 0.30 (0.126 + 0.012) 0.5 + 0.30 (0.020 + 0.012) THE ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com 4 www.DataSheet.in ALLP WER SOURCE THE EMI SURFACE MOUNT BEADS / FB TYPE 1. Ordering Code: 2. Shape: 3. Dimensions: (m/m) Part Number FB423226 FB863226 FB784729 4. Electrical Characteristics: A 4.0 + 0.25 8.5 + 0.3 7.8 + 0.4 B 3.0 + 0.15 3.0 + 0.15 C D V 1.9 6.4 5.5 Wref 4.9 9.4 8.7 X Y 2.55 + 0.15 1.5 + 0.5 2.55 + 0.15 1.5 + 0.5 1.50.5 3.0 3.0 3.0 3.0 3.0 3.0 4.75 + 0.25 2.92 + 0.25 Part Number FB423226-C3 FB863226-C3 FB784729-C3 Impedance (W) Min. Rdc (W) Max. 100MHz 25MHz 20 45 45 35 80 80 0.6 0.9 0.9 TEST INSTRUMENTS: HP419A RF IMPEDANCE ANALYZER 5. Packaging: 500 pcs. per Reel THE 3 ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com www.DataSheet.in ALLP WER SOURCE THE NI-ZN MATERIAL CHARACTERISTICS Ui 550 200 300 250 100 750 800 1000 1200 1500 1800 3000 55 70 10 300 50 200 300 Working Tan d / ui Frequency X10-5 (MHz) 2.3 0.1~2 (0.2 MHz) 5.0 0.4~2 (0.2 MHz) 2.0 0.4~2 (0.4 MHz) 18.0 0.1~6 (1 MHz) 5.0 0.5~20 (2 MHz) 7.0 0.1~0.7 (0.3 MHz) 6.9 0.1~0.7 (0.5 MHz) 2.0 0.01~0.5 (0.1 MHz) 2.1 0.01~0.5 (0.1 MHz) 6.0 0.01~0.5 (0.1MHz) 2.5 0.01~0.5 (0.1 MHz) 2.0 0.01~0.5 (0.1 MHz) 10.0 0.5~15 (2 MHz) 10.0 0.5~15 (2 MHz) 40.0 10~150 (10 MHz) 4.0 0.1~2 (0.4 MHz) 18 0.5~50 (2 MHz) 5.3 0.1~2 (1 MHz) 3.2 0.1~1 (1 MHz) Bms Gauss 2700 2600 2700 3000 3000 2900 2400 2900 2900 2800 2900 2800 2800 2900 1400 2900 3100 2400 2800 Br Gauss 800 600 1600 1500 1800 600 850 900 900 600 700 650 1150 2200 500 1500 2250 630 1440 HC Oe 0.28 0.14 0.52 0.75 2.0 0.3 0.3 0.35 0.3 0.2 0.16 0.08 3.6 3.48 16.9 0.56 6.6 1.9 0.8 TC o C 150 150 150 200 330 130 140 100 100 100 100 100 300 300 300 180 300 175 175 r (W-cm) 107 107 107 107 104 107 107 107 107 107 107 107 107 107 107 107 107 107 107 Material A A1 A2G A3 A5 B7 B8 B10 B12 B15 B18 B30 K1 K2 K3 DB3 N9D C2 C3 THE ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com 2 www.DataSheet.in ALLP WER SOURCE THE PRODUCT SELECTION GUIDE Page 3 EMI SURFACE MOUNT BEADS / FB TYPE Page 20 FLAT CABLE EMI CORES / FP FI TYPE Page 26 MULTI-APERTURE CORES / RID TYPE Page 4 EMI MULTILAYER FERRITE CHIP BEADS / CB TYPE Page 22 ROUND CABLE EMI CORES / FH TYPE Page 27 ANTENNA FERRITE BAR / AP AR TYPE Page 12 EMI BEAD CORES / RH TYPE Page 24 CONNECTOR EMI CORES / FD FDH TYPE Page 31 Mn-Zn TOROID CORES Page 16 EMI TOROID CORES / T TYPE Page 25 MULTI-APERTURE WOUND BEADS / R6H TYPE Page 33 IRON POWDER CORES THE ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 1 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com www.DataSheet.in ALLP WER SOURCE THE IRON POWDER CORES 4. Shape: 5. Dimensions and Magnetic Parameters PART NO. T37-26 T44-36 T50-26 T50-26B T50-26D T60-26 T68-26 T68-26A T80-26 T80-26B T90-26 T106-26 T130-26 T130-26A OD m/m 9.53 + 0.4 11.2 + 0.4 12.7 + 0.4 12.7 + 0.4 12.7 + 0.4 15.2 + 0.4 17.5 + 0.4 17.5 + 0.4 20.2 + 0.4 20.2 + 0.4 22.9 + 0.5 26.9 + 0.5 33.0 + 0.5 33.0 + 0.5 HT m/m 3.25 + 0.4 4.04 + 0.4 4.83 + 0.4 6.35 + 0.4 9.35 + 0.4 5.94 + 0.4 4.83 + 0.4 6.35 + 0.4 6.35 + 0.4 9.53 + 0.4 9.53 + 0.5 11.1 + 0.5 11.1 + 0.5 5.72 + 0.5 ID m/m 5.2 + 0.4 5.82 + 0.4 7.7 + 0.4 7.7 + 0.4 7.7 + 0.4 8.53 + 0.4 9.4 + 0.4 9.4 + 0.4 12.6 + 0.4 12.6 + 0.4 1.40 + 0.5 14.5 + 0.5 19.8 + 0.5 19.8 + 0.5 AL nH/N2 26-0 34-0 31-0 41-0 67-0 47-0 41-0 54-0 43-0 66-0 65-0 87-0 76-0 40-0 L cm 2.31 2.68 3.20 3.20 3.20 3.74 4.24 4.24 5.15 5.15 5.80 6.50 8.29 8.29 A cm2 0.64 0.99 0.12 0.15 0.22 0.19 0.19 0.24 0.24 0.35 0.42 0.69 0.73 0.36 THE 27 www.DataSheet.in ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702 tdisales@theallpower.com 100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 www. theallpower.com |
Price & Availability of CB160808T-121Y-C3
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |